First public commit

12 files changed, 2701 insertions, 0 deletions

diff --git a/vendor/github.com/gorilla/mux/.travis.yml b/vendor/github.com/gorilla/mux/.travis.yml
new file mode 100644
index 0000000..3302233
--- /dev/null
+++ b/vendor/github.com/gorilla/mux/.travis.yml
@@ -0,0 +1,22 @@
+language: go
+sudo: false
+
+matrix:
+  include:
+    - go: 1.5
+    - go: 1.6
+    - go: 1.7
+    - go: 1.8
+    - go: 1.9
+    - go: tip
+  allow_failures:
+    - go: tip
+
+install:
+  - # Skip
+
+script:
+  - go get -t -v ./...
+  - diff -u <(echo -n) <(gofmt -d .)
+  - go tool vet .
+  - go test -v -race ./...
diff --git a/vendor/github.com/gorilla/mux/ISSUE_TEMPLATE.md b/vendor/github.com/gorilla/mux/ISSUE_TEMPLATE.md
new file mode 100644
index 0000000..232be82
--- /dev/null
+++ b/vendor/github.com/gorilla/mux/ISSUE_TEMPLATE.md
@@ -0,0 +1,11 @@
+**What version of Go are you running?** (Paste the output of `go version`)
+
+
+**What version of gorilla/mux are you at?** (Paste the output of `git rev-parse HEAD` inside `$GOPATH/src/github.com/gorilla/mux`)
+
+
+**Describe your problem** (and what you have tried so far)
+
+
+**Paste a minimal, runnable, reproduction of your issue below** (use backticks to format it)
+
diff --git a/vendor/github.com/gorilla/mux/LICENSE b/vendor/github.com/gorilla/mux/LICENSE
new file mode 100644
index 0000000..0e5fb87
--- /dev/null
+++ b/vendor/github.com/gorilla/mux/LICENSE
@@ -0,0 +1,27 @@
+Copyright (c) 2012 Rodrigo Moraes. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+	 * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+	 * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+	 * Neither the name of Google Inc. nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/vendor/github.com/gorilla/mux/README.md b/vendor/github.com/gorilla/mux/README.md
new file mode 100644
index 0000000..f9b3103
--- /dev/null
+++ b/vendor/github.com/gorilla/mux/README.md
@@ -0,0 +1,560 @@
+gorilla/mux
+===
+[![GoDoc](https://godoc.org/github.com/gorilla/mux?status.svg)](https://godoc.org/github.com/gorilla/mux)
+[![Build Status](https://travis-ci.org/gorilla/mux.svg?branch=master)](https://travis-ci.org/gorilla/mux)
+[![Sourcegraph](https://sourcegraph.com/github.com/gorilla/mux/-/badge.svg)](https://sourcegraph.com/github.com/gorilla/mux?badge)
+
+![Gorilla Logo](http://www.gorillatoolkit.org/static/images/gorilla-icon-64.png)
+
+http://www.gorillatoolkit.org/pkg/mux
+
+Package `gorilla/mux` implements a request router and dispatcher for matching incoming requests to
+their respective handler.
+
+The name mux stands for "HTTP request multiplexer". Like the standard `http.ServeMux`, `mux.Router` matches incoming requests against a list of registered routes and calls a handler for the route that matches the URL or other conditions. The main features are:
+
+* It implements the `http.Handler` interface so it is compatible with the standard `http.ServeMux`.
+* Requests can be matched based on URL host, path, path prefix, schemes, header and query values, HTTP methods or using custom matchers.
+* URL hosts, paths and query values can have variables with an optional regular expression.
+* Registered URLs can be built, or "reversed", which helps maintaining references to resources.
+* Routes can be used as subrouters: nested routes are only tested if the parent route matches. This is useful to define groups of routes that share common conditions like a host, a path prefix or other repeated attributes. As a bonus, this optimizes request matching.
+
+---
+
+* [Install](#install)
+* [Examples](#examples)
+* [Matching Routes](#matching-routes)
+* [Static Files](#static-files)
+* [Registered URLs](#registered-urls)
+* [Walking Routes](#walking-routes)
+* [Graceful Shutdown](#graceful-shutdown)
+* [Middleware](#middleware)
+* [Full Example](#full-example)
+
+---
+
+## Install
+
+With a [correctly configured](https://golang.org/doc/install#testing) Go toolchain:
+
+```sh
+go get -u github.com/gorilla/mux
+```
+
+## Examples
+
+Let's start registering a couple of URL paths and handlers:
+
+```go
+func main() {
+    r := mux.NewRouter()
+    r.HandleFunc("/", HomeHandler)
+    r.HandleFunc("/products", ProductsHandler)
+    r.HandleFunc("/articles", ArticlesHandler)
+    http.Handle("/", r)
+}
+```
+
+Here we register three routes mapping URL paths to handlers. This is equivalent to how `http.HandleFunc()` works: if an incoming request URL matches one of the paths, the corresponding handler is called passing (`http.ResponseWriter`, `*http.Request`) as parameters.
+
+Paths can have variables. They are defined using the format `{name}` or `{name:pattern}`. If a regular expression pattern is not defined, the matched variable will be anything until the next slash. For example:
+
+```go
+r := mux.NewRouter()
+r.HandleFunc("/products/{key}", ProductHandler)
+r.HandleFunc("/articles/{category}/", ArticlesCategoryHandler)
+r.HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler)
+```
+
+The names are used to create a map of route variables which can be retrieved calling `mux.Vars()`:
+
+```go
+func ArticlesCategoryHandler(w http.ResponseWriter, r *http.Request) {
+    vars := mux.Vars(r)
+    w.WriteHeader(http.StatusOK)
+    fmt.Fprintf(w, "Category: %v\n", vars["category"])
+}
+```
+
+And this is all you need to know about the basic usage. More advanced options are explained below.
+
+### Matching Routes
+
+Routes can also be restricted to a domain or subdomain. Just define a host pattern to be matched. They can also have variables:
+
+```go
+r := mux.NewRouter()
+// Only matches if domain is "www.example.com".
+r.Host("www.example.com")
+// Matches a dynamic subdomain.
+r.Host("{subdomain:[a-z]+}.domain.com")
+```
+
+There are several other matchers that can be added. To match path prefixes:
+
+```go
+r.PathPrefix("/products/")
+```
+
+...or HTTP methods:
+
+```go
+r.Methods("GET", "POST")
+```
+
+...or URL schemes:
+
+```go
+r.Schemes("https")
+```
+
+...or header values:
+
+```go
+r.Headers("X-Requested-With", "XMLHttpRequest")
+```
+
+...or query values:
+
+```go
+r.Queries("key", "value")
+```
+
+...or to use a custom matcher function:
+
+```go
+r.MatcherFunc(func(r *http.Request, rm *RouteMatch) bool {
+    return r.ProtoMajor == 0
+})
+```
+
+...and finally, it is possible to combine several matchers in a single route:
+
+```go
+r.HandleFunc("/products", ProductsHandler).
+  Host("www.example.com").
+  Methods("GET").
+  Schemes("http")
+```
+
+Routes are tested in the order they were added to the router. If two routes match, the first one wins:
+
+```go
+r := mux.NewRouter()
+r.HandleFunc("/specific", specificHandler)
+r.PathPrefix("/").Handler(catchAllHandler)
+```
+
+Setting the same matching conditions again and again can be boring, so we have a way to group several routes that share the same requirements. We call it "subrouting".
+
+For example, let's say we have several URLs that should only match when the host is `www.example.com`. Create a route for that host and get a "subrouter" from it:
+
+```go
+r := mux.NewRouter()
+s := r.Host("www.example.com").Subrouter()
+```
+
+Then register routes in the subrouter:
+
+```go
+s.HandleFunc("/products/", ProductsHandler)
+s.HandleFunc("/products/{key}", ProductHandler)
+s.HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler)
+```
+
+The three URL paths we registered above will only be tested if the domain is `www.example.com`, because the subrouter is tested first. This is not only convenient, but also optimizes request matching. You can create subrouters combining any attribute matchers accepted by a route.
+
+Subrouters can be used to create domain or path "namespaces": you define subrouters in a central place and then parts of the app can register its paths relatively to a given subrouter.
+
+There's one more thing about subroutes. When a subrouter has a path prefix, the inner routes use it as base for their paths:
+
+```go
+r := mux.NewRouter()
+s := r.PathPrefix("/products").Subrouter()
+// "/products/"
+s.HandleFunc("/", ProductsHandler)
+// "/products/{key}/"
+s.HandleFunc("/{key}/", ProductHandler)
+// "/products/{key}/details"
+s.HandleFunc("/{key}/details", ProductDetailsHandler)
+```
+### Listing Routes
+
+Routes on a mux can be listed using the Router.Walk method—useful for generating documentation:
+
+```go
+package main
+
+import (
+    "fmt"
+    "net/http"
+    "strings"
+
+    "github.com/gorilla/mux"
+)
+
+func handler(w http.ResponseWriter, r *http.Request) {
+    return
+}
+
+func main() {
+    r := mux.NewRouter()
+    r.HandleFunc("/", handler)
+    r.HandleFunc("/products", handler).Methods("POST")
+    r.HandleFunc("/articles", handler).Methods("GET")
+    r.HandleFunc("/articles/{id}", handler).Methods("GET", "PUT")
+    r.HandleFunc("/authors", handler).Queries("surname", "{surname}")
+    r.Walk(func(route *mux.Route, router *mux.Router, ancestors []*mux.Route) error {
+        t, err := route.GetPathTemplate()
+        if err != nil {
+            return err
+        }
+        qt, err := route.GetQueriesTemplates()
+        if err != nil {
+            return err
+        }
+        // p will contain regular expression is compatible with regular expression in Perl, Python, and other languages.
+        // for instance the regular expression for path '/articles/{id}' will be '^/articles/(?P<v0>[^/]+)$'
+        p, err := route.GetPathRegexp()
+        if err != nil {
+            return err
+        }
+        // qr will contain a list of regular expressions with the same semantics as GetPathRegexp,
+        // just applied to the Queries pairs instead, e.g., 'Queries("surname", "{surname}") will return
+        // {"^surname=(?P<v0>.*)$}. Where each combined query pair will have an entry in the list.
+        qr, err := route.GetQueriesRegexp()
+        if err != nil {
+            return err
+        }
+        m, err := route.GetMethods()
+        if err != nil {
+            return err
+        }
+        fmt.Println(strings.Join(m, ","), strings.Join(qt, ","), strings.Join(qr, ","), t, p)
+        return nil
+    })
+    http.Handle("/", r)
+}
+```
+
+### Static Files
+
+Note that the path provided to `PathPrefix()` represents a "wildcard": calling
+`PathPrefix("/static/").Handler(...)` means that the handler will be passed any
+request that matches "/static/*". This makes it easy to serve static files with mux:
+
+```go
+func main() {
+    var dir string
+
+    flag.StringVar(&dir, "dir", ".", "the directory to serve files from. Defaults to the current dir")
+    flag.Parse()
+    r := mux.NewRouter()
+
+    // This will serve files under http://localhost:8000/static/<filename>
+    r.PathPrefix("/static/").Handler(http.StripPrefix("/static/", http.FileServer(http.Dir(dir))))
+
+    srv := &http.Server{
+        Handler:      r,
+        Addr:         "127.0.0.1:8000",
+        // Good practice: enforce timeouts for servers you create!
+        WriteTimeout: 15 * time.Second,
+        ReadTimeout:  15 * time.Second,
+    }
+
+    log.Fatal(srv.ListenAndServe())
+}
+```
+
+### Registered URLs
+
+Now let's see how to build registered URLs.
+
+Routes can be named. All routes that define a name can have their URLs built, or "reversed". We define a name calling `Name()` on a route. For example:
+
+```go
+r := mux.NewRouter()
+r.HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler).
+  Name("article")
+```
+
+To build a URL, get the route and call the `URL()` method, passing a sequence of key/value pairs for the route variables. For the previous route, we would do:
+
+```go
+url, err := r.Get("article").URL("category", "technology", "id", "42")
+```
+
+...and the result will be a `url.URL` with the following path:
+
+```
+"/articles/technology/42"
+```
+
+This also works for host and query value variables:
+
+```go
+r := mux.NewRouter()
+r.Host("{subdomain}.domain.com").
+  Path("/articles/{category}/{id:[0-9]+}").
+  Queries("filter", "{filter}").
+  HandlerFunc(ArticleHandler).
+  Name("article")
+
+// url.String() will be "http://news.domain.com/articles/technology/42?filter=gorilla"
+url, err := r.Get("article").URL("subdomain", "news",
+                                 "category", "technology",
+                                 "id", "42",
+                                 "filter", "gorilla")
+```
+
+All variables defined in the route are required, and their values must conform to the corresponding patterns. These requirements guarantee that a generated URL will always match a registered route -- the only exception is for explicitly defined "build-only" routes which never match.
+
+Regex support also exists for matching Headers within a route. For example, we could do:
+
+```go
+r.HeadersRegexp("Content-Type", "application/(text|json)")
+```
+
+...and the route will match both requests with a Content-Type of `application/json` as well as `application/text`
+
+There's also a way to build only the URL host or path for a route: use the methods `URLHost()` or `URLPath()` instead. For the previous route, we would do:
+
+```go
+// "http://news.domain.com/"
+host, err := r.Get("article").URLHost("subdomain", "news")
+
+// "/articles/technology/42"
+path, err := r.Get("article").URLPath("category", "technology", "id", "42")
+```
+
+And if you use subrouters, host and path defined separately can be built as well:
+
+```go
+r := mux.NewRouter()
+s := r.Host("{subdomain}.domain.com").Subrouter()
+s.Path("/articles/{category}/{id:[0-9]+}").
+  HandlerFunc(ArticleHandler).
+  Name("article")
+
+// "http://news.domain.com/articles/technology/42"
+url, err := r.Get("article").URL("subdomain", "news",
+                                 "category", "technology",
+                                 "id", "42")
+```
+
+### Walking Routes
+
+The `Walk` function on `mux.Router` can be used to visit all of the routes that are registered on a router. For example,
+the following prints all of the registered routes:
+
+```go
+r := mux.NewRouter()
+r.HandleFunc("/", handler)
+r.HandleFunc("/products", handler).Methods("POST")
+r.HandleFunc("/articles", handler).Methods("GET")
+r.HandleFunc("/articles/{id}", handler).Methods("GET", "PUT")
+r.HandleFunc("/authors", handler).Queries("surname", "{surname}")
+r.Walk(func(route *mux.Route, router *mux.Router, ancestors []*mux.Route) error {
+    t, err := route.GetPathTemplate()
+    if err != nil {
+        return err
+    }
+    qt, err := route.GetQueriesTemplates()
+    if err != nil {
+        return err
+    }
+    // p will contain a regular expression that is compatible with regular expressions in Perl, Python, and other languages.
+    // For example, the regular expression for path '/articles/{id}' will be '^/articles/(?P<v0>[^/]+)$'.
+    p, err := route.GetPathRegexp()
+    if err != nil {
+        return err
+    }
+    // qr will contain a list of regular expressions with the same semantics as GetPathRegexp,
+    // just applied to the Queries pairs instead, e.g., 'Queries("surname", "{surname}") will return
+    // {"^surname=(?P<v0>.*)$}. Where each combined query pair will have an entry in the list.
+    qr, err := route.GetQueriesRegexp()
+    if err != nil {
+        return err
+    }
+    m, err := route.GetMethods()
+    if err != nil {
+        return err
+    }
+    fmt.Println(strings.Join(m, ","), strings.Join(qt, ","), strings.Join(qr, ","), t, p)
+    return nil
+})
+```
+
+### Graceful Shutdown
+
+Go 1.8 introduced the ability to [gracefully shutdown](https://golang.org/doc/go1.8#http_shutdown) a `*http.Server`. Here's how to do that alongside `mux`:
+
+```go
+package main
+
+import (
+    "context"
+    "flag"
+    "log"
+    "net/http"
+    "os"
+    "os/signal"
+
+    "github.com/gorilla/mux"
+)
+
+func main() {
+    var wait time.Duration
+    flag.DurationVar(&wait, "graceful-timeout", time.Second * 15, "the duration for which the server gracefully wait for existing connections to finish - e.g. 15s or 1m")
+    flag.Parse()
+
+    r := mux.NewRouter()
+    // Add your routes as needed
+    
+    srv := &http.Server{
+        Addr:         "0.0.0.0:8080",
+        // Good practice to set timeouts to avoid Slowloris attacks.
+        WriteTimeout: time.Second * 15,
+        ReadTimeout:  time.Second * 15,
+        IdleTimeout:  time.Second * 60,
+        Handler: r, // Pass our instance of gorilla/mux in.
+    }
+
+    // Run our server in a goroutine so that it doesn't block.
+    go func() {
+        if err := srv.ListenAndServe(); err != nil {
+            log.Println(err)
+        }
+    }()
+    
+    c := make(chan os.Signal, 1)
+    // We'll accept graceful shutdowns when quit via SIGINT (Ctrl+C)
+    // SIGKILL, SIGQUIT or SIGTERM (Ctrl+/) will not be caught.
+    signal.Notify(c, os.Interrupt)
+
+    // Block until we receive our signal.
+    <-c
+
+    // Create a deadline to wait for.
+    ctx, cancel := context.WithTimeout(ctx, wait)
+    // Doesn't block if no connections, but will otherwise wait
+    // until the timeout deadline.
+    srv.Shutdown(ctx)
+    // Optionally, you could run srv.Shutdown in a goroutine and block on
+    // <-ctx.Done() if your application should wait for other services
+    // to finalize based on context cancellation.
+    log.Println("shutting down")
+    os.Exit(0)
+}
+```
+
+### Middleware
+
+Mux supports the addition of middlewares to a [Router](https://godoc.org/github.com/gorilla/mux#Router), which are executed in the order they are added if a match is found, including its subrouters.
+Middlewares are (typically) small pieces of code which take one request, do something with it, and pass it down to another middleware or the final handler. Some common use cases for middleware are request logging, header manipulation, or `ResponseWriter` hijacking.
+
+Mux middlewares are defined using the de facto standard type:
+
+```go
+type MiddlewareFunc func(http.Handler) http.Handler
+```
+
+Typically, the returned handler is a closure which does something with the http.ResponseWriter and http.Request passed to it, and then calls the handler passed as parameter to the MiddlewareFunc. This takes advantage of closures being able access variables from the context where they are created, while retaining the signature enforced by the receivers.
+
+A very basic middleware which logs the URI of the request being handled could be written as:
+
+```go
+func simpleMw(next http.Handler) http.Handler {
+    return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+        // Do stuff here
+        log.Println(r.RequestURI)
+        // Call the next handler, which can be another middleware in the chain, or the final handler.
+        next.ServeHTTP(w, r)
+    })
+}
+```
+
+Middlewares can be added to a router using `Router.AddMiddlewareFunc()`:
+
+```go
+r := mux.NewRouter()
+r.HandleFunc("/", handler)
+r.AddMiddleware(simpleMw)
+```
+
+A more complex authentication middleware, which maps session token to users, could be written as:
+
+```go
+// Define our struct
+type authenticationMiddleware struct {
+	tokenUsers map[string]string
+}
+
+// Initialize it somewhere
+func (amw *authenticationMiddleware) Populate() {
+	amw.tokenUsers["00000000"] = "user0"
+	amw.tokenUsers["aaaaaaaa"] = "userA"
+	amw.tokenUsers["05f717e5"] = "randomUser"
+	amw.tokenUsers["deadbeef"] = "user0"
+}
+
+// Middleware function, which will be called for each request
+func (amw *authenticationMiddleware) Middleware(next http.Handler) http.Handler {
+    return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+        token := r.Header.Get("X-Session-Token")
+        
+        if user, found := amw.tokenUsers[token]; found {
+        	// We found the token in our map
+        	log.Printf("Authenticated user %s\n", user)
+        	// Pass down the request to the next middleware (or final handler)
+        	next.ServeHTTP(w, r)
+        } else {
+        	// Write an error and stop the handler chain
+        	http.Error(w, "Forbidden", 403)
+        }
+    })
+}
+```
+
+```go
+r := mux.NewRouter()
+r.HandleFunc("/", handler)
+
+amw := authenticationMiddleware{}
+amw.Populate()
+
+r.AddMiddlewareFunc(amw.Middleware)
+```
+
+Note: The handler chain will be stopped if your middleware doesn't call `next.ServeHTTP()` with the corresponding parameters. This can be used to abort a request if the middleware writer wants to. Middlewares *should* write to `ResponseWriter` if they *are* going to terminate the request, and they *should not* write to `ResponseWriter` if they *are not* going to terminate it.
+
+## Full Example
+
+Here's a complete, runnable example of a small `mux` based server:
+
+```go
+package main
+
+import (
+    "net/http"
+    "log"
+    "github.com/gorilla/mux"
+)
+
+func YourHandler(w http.ResponseWriter, r *http.Request) {
+    w.Write([]byte("Gorilla!\n"))
+}
+
+func main() {
+    r := mux.NewRouter()
+    // Routes consist of a path and a handler function.
+    r.HandleFunc("/", YourHandler)
+
+    // Bind to a port and pass our router in
+    log.Fatal(http.ListenAndServe(":8000", r))
+}
+```
+
+## License
+
+BSD licensed. See the LICENSE file for details.
diff --git a/vendor/github.com/gorilla/mux/context_gorilla.go b/vendor/github.com/gorilla/mux/context_gorilla.go
new file mode 100644
index 0000000..d7adaa8
--- /dev/null
+++ b/vendor/github.com/gorilla/mux/context_gorilla.go
@@ -0,0 +1,26 @@
+// +build !go1.7
+
+package mux
+
+import (
+	"net/http"
+
+	"github.com/gorilla/context"
+)
+
+func contextGet(r *http.Request, key interface{}) interface{} {
+	return context.Get(r, key)
+}
+
+func contextSet(r *http.Request, key, val interface{}) *http.Request {
+	if val == nil {
+		return r
+	}
+
+	context.Set(r, key, val)
+	return r
+}
+
+func contextClear(r *http.Request) {
+	context.Clear(r)
+}
diff --git a/vendor/github.com/gorilla/mux/context_native.go b/vendor/github.com/gorilla/mux/context_native.go
new file mode 100644
index 0000000..209cbea
--- /dev/null
+++ b/vendor/github.com/gorilla/mux/context_native.go
@@ -0,0 +1,24 @@
+// +build go1.7
+
+package mux
+
+import (
+	"context"
+	"net/http"
+)
+
+func contextGet(r *http.Request, key interface{}) interface{} {
+	return r.Context().Value(key)
+}
+
+func contextSet(r *http.Request, key, val interface{}) *http.Request {
+	if val == nil {
+		return r
+	}
+
+	return r.WithContext(context.WithValue(r.Context(), key, val))
+}
+
+func contextClear(r *http.Request) {
+	return
+}
diff --git a/vendor/github.com/gorilla/mux/doc.go b/vendor/github.com/gorilla/mux/doc.go
new file mode 100644
index 0000000..013f088
--- /dev/null
+++ b/vendor/github.com/gorilla/mux/doc.go
@@ -0,0 +1,307 @@
+// Copyright 2012 The Gorilla Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+/*
+Package mux implements a request router and dispatcher.
+
+The name mux stands for "HTTP request multiplexer". Like the standard
+http.ServeMux, mux.Router matches incoming requests against a list of
+registered routes and calls a handler for the route that matches the URL
+or other conditions. The main features are:
+
+	* Requests can be matched based on URL host, path, path prefix, schemes,
+	  header and query values, HTTP methods or using custom matchers.
+	* URL hosts, paths and query values can have variables with an optional
+	  regular expression.
+	* Registered URLs can be built, or "reversed", which helps maintaining
+	  references to resources.
+	* Routes can be used as subrouters: nested routes are only tested if the
+	  parent route matches. This is useful to define groups of routes that
+	  share common conditions like a host, a path prefix or other repeated
+	  attributes. As a bonus, this optimizes request matching.
+	* It implements the http.Handler interface so it is compatible with the
+	  standard http.ServeMux.
+
+Let's start registering a couple of URL paths and handlers:
+
+	func main() {
+		r := mux.NewRouter()
+		r.HandleFunc("/", HomeHandler)
+		r.HandleFunc("/products", ProductsHandler)
+		r.HandleFunc("/articles", ArticlesHandler)
+		http.Handle("/", r)
+	}
+
+Here we register three routes mapping URL paths to handlers. This is
+equivalent to how http.HandleFunc() works: if an incoming request URL matches
+one of the paths, the corresponding handler is called passing
+(http.ResponseWriter, *http.Request) as parameters.
+
+Paths can have variables. They are defined using the format {name} or
+{name:pattern}. If a regular expression pattern is not defined, the matched
+variable will be anything until the next slash. For example:
+
+	r := mux.NewRouter()
+	r.HandleFunc("/products/{key}", ProductHandler)
+	r.HandleFunc("/articles/{category}/", ArticlesCategoryHandler)
+	r.HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler)
+
+Groups can be used inside patterns, as long as they are non-capturing (?:re). For example:
+
+	r.HandleFunc("/articles/{category}/{sort:(?:asc|desc|new)}", ArticlesCategoryHandler)
+
+The names are used to create a map of route variables which can be retrieved
+calling mux.Vars():
+
+	vars := mux.Vars(request)
+	category := vars["category"]
+
+Note that if any capturing groups are present, mux will panic() during parsing. To prevent
+this, convert any capturing groups to non-capturing, e.g. change "/{sort:(asc|desc)}" to
+"/{sort:(?:asc|desc)}". This is a change from prior versions which behaved unpredictably
+when capturing groups were present.
+
+And this is all you need to know about the basic usage. More advanced options
+are explained below.
+
+Routes can also be restricted to a domain or subdomain. Just define a host
+pattern to be matched. They can also have variables:
+
+	r := mux.NewRouter()
+	// Only matches if domain is "www.example.com".
+	r.Host("www.example.com")
+	// Matches a dynamic subdomain.
+	r.Host("{subdomain:[a-z]+}.domain.com")
+
+There are several other matchers that can be added. To match path prefixes:
+
+	r.PathPrefix("/products/")
+
+...or HTTP methods:
+
+	r.Methods("GET", "POST")
+
+...or URL schemes:
+
+	r.Schemes("https")
+
+...or header values:
+
+	r.Headers("X-Requested-With", "XMLHttpRequest")
+
+...or query values:
+
+	r.Queries("key", "value")
+
+...or to use a custom matcher function:
+
+	r.MatcherFunc(func(r *http.Request, rm *RouteMatch) bool {
+		return r.ProtoMajor == 0
+	})
+
+...and finally, it is possible to combine several matchers in a single route:
+
+	r.HandleFunc("/products", ProductsHandler).
+	  Host("www.example.com").
+	  Methods("GET").
+	  Schemes("http")
+
+Setting the same matching conditions again and again can be boring, so we have
+a way to group several routes that share the same requirements.
+We call it "subrouting".
+
+For example, let's say we have several URLs that should only match when the
+host is "www.example.com". Create a route for that host and get a "subrouter"
+from it:
+
+	r := mux.NewRouter()
+	s := r.Host("www.example.com").Subrouter()
+
+Then register routes in the subrouter:
+
+	s.HandleFunc("/products/", ProductsHandler)
+	s.HandleFunc("/products/{key}", ProductHandler)
+	s.HandleFunc("/articles/{category}/{id:[0-9]+}"), ArticleHandler)
+
+The three URL paths we registered above will only be tested if the domain is
+"www.example.com", because the subrouter is tested first. This is not
+only convenient, but also optimizes request matching. You can create
+subrouters combining any attribute matchers accepted by a route.
+
+Subrouters can be used to create domain or path "namespaces": you define
+subrouters in a central place and then parts of the app can register its
+paths relatively to a given subrouter.
+
+There's one more thing about subroutes. When a subrouter has a path prefix,
+the inner routes use it as base for their paths:
+
+	r := mux.NewRouter()
+	s := r.PathPrefix("/products").Subrouter()
+	// "/products/"
+	s.HandleFunc("/", ProductsHandler)
+	// "/products/{key}/"
+	s.HandleFunc("/{key}/", ProductHandler)
+	// "/products/{key}/details"
+	s.HandleFunc("/{key}/details", ProductDetailsHandler)
+
+Note that the path provided to PathPrefix() represents a "wildcard": calling
+PathPrefix("/static/").Handler(...) means that the handler will be passed any
+request that matches "/static/*". This makes it easy to serve static files with mux:
+
+	func main() {
+		var dir string
+
+		flag.StringVar(&dir, "dir", ".", "the directory to serve files from. Defaults to the current dir")
+		flag.Parse()
+		r := mux.NewRouter()
+
+		// This will serve files under http://localhost:8000/static/<filename>
+		r.PathPrefix("/static/").Handler(http.StripPrefix("/static/", http.FileServer(http.Dir(dir))))
+
+		srv := &http.Server{
+			Handler:      r,
+			Addr:         "127.0.0.1:8000",
+			// Good practice: enforce timeouts for servers you create!
+			WriteTimeout: 15 * time.Second,
+			ReadTimeout:  15 * time.Second,
+		}
+
+		log.Fatal(srv.ListenAndServe())
+	}
+
+Now let's see how to build registered URLs.
+
+Routes can be named. All routes that define a name can have their URLs built,
+or "reversed". We define a name calling Name() on a route. For example:
+
+	r := mux.NewRouter()
+	r.HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler).
+	  Name("article")
+
+To build a URL, get the route and call the URL() method, passing a sequence of
+key/value pairs for the route variables. For the previous route, we would do:
+
+	url, err := r.Get("article").URL("category", "technology", "id", "42")
+
+...and the result will be a url.URL with the following path:
+
+	"/articles/technology/42"
+
+This also works for host and query value variables:
+
+	r := mux.NewRouter()
+	r.Host("{subdomain}.domain.com").
+	  Path("/articles/{category}/{id:[0-9]+}").
+	  Queries("filter", "{filter}").
+	  HandlerFunc(ArticleHandler).
+	  Name("article")
+
+	// url.String() will be "http://news.domain.com/articles/technology/42?filter=gorilla"
+	url, err := r.Get("article").URL("subdomain", "news",
+	                                 "category", "technology",
+	                                 "id", "42",
+	                                 "filter", "gorilla")
+
+All variables defined in the route are required, and their values must
+conform to the corresponding patterns. These requirements guarantee that a
+generated URL will always match a registered route -- the only exception is
+for explicitly defined "build-only" routes which never match.
+
+Regex support also exists for matching Headers within a route. For example, we could do:
+
+	r.HeadersRegexp("Content-Type", "application/(text|json)")
+
+...and the route will match both requests with a Content-Type of `application/json` as well as
+`application/text`
+
+There's also a way to build only the URL host or path for a route:
+use the methods URLHost() or URLPath() instead. For the previous route,
+we would do:
+
+	// "http://news.domain.com/"
+	host, err := r.Get("article").URLHost("subdomain", "news")
+
+	// "/articles/technology/42"
+	path, err := r.Get("article").URLPath("category", "technology", "id", "42")
+
+And if you use subrouters, host and path defined separately can be built
+as well:
+
+	r := mux.NewRouter()
+	s := r.Host("{subdomain}.domain.com").Subrouter()
+	s.Path("/articles/{category}/{id:[0-9]+}").
+	  HandlerFunc(ArticleHandler).
+	  Name("article")
+
+	// "http://news.domain.com/articles/technology/42"
+	url, err := r.Get("article").URL("subdomain", "news",
+	                                 "category", "technology",
+	                                 "id", "42")
+
+Since **vX.Y.Z**, mux supports the addition of middlewares to a [Router](https://godoc.org/github.com/gorilla/mux#Router), which are executed if a
+match is found (including subrouters). Middlewares are defined using the de facto standard type:
+
+	type MiddlewareFunc func(http.Handler) http.Handler
+
+Typically, the returned handler is a closure which does something with the http.ResponseWriter and http.Request passed to it, and then calls the handler passed as parameter to the MiddlewareFunc (closures can access variables from the context where they are created).
+
+A very basic middleware which logs the URI of the request being handled could be written as:
+
+	func simpleMw(next http.Handler) http.Handler {
+		return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+			// Do stuff here
+			log.Println(r.RequestURI)
+			// Call the next handler, which can be another middleware in the chain, or the final handler.
+			next.ServeHTTP(w, r)
+		})
+	}
+
+Middlewares can be added to a router using `Router.Use()`:
+
+	r := mux.NewRouter()
+	r.HandleFunc("/", handler)
+	r.AddMiddleware(simpleMw)
+
+A more complex authentication middleware, which maps session token to users, could be written as:
+
+	// Define our struct
+	type authenticationMiddleware struct {
+		tokenUsers map[string]string
+	}
+
+	// Initialize it somewhere
+	func (amw *authenticationMiddleware) Populate() {
+		amw.tokenUsers["00000000"] = "user0"
+		amw.tokenUsers["aaaaaaaa"] = "userA"
+		amw.tokenUsers["05f717e5"] = "randomUser"
+		amw.tokenUsers["deadbeef"] = "user0"
+	}
+
+	// Middleware function, which will be called for each request
+	func (amw *authenticationMiddleware) Middleware(next http.Handler) http.Handler {
+		return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+			token := r.Header.Get("X-Session-Token")
+
+			if user, found := amw.tokenUsers[token]; found {
+				// We found the token in our map
+				log.Printf("Authenticated user %s\n", user)
+				next.ServeHTTP(w, r)
+			} else {
+				http.Error(w, "Forbidden", 403)
+			}
+		})
+	}
+
+	r := mux.NewRouter()
+	r.HandleFunc("/", handler)
+
+	amw := authenticationMiddleware{}
+	amw.Populate()
+
+	r.Use(amw.Middleware)
+
+Note: The handler chain will be stopped if your middleware doesn't call `next.ServeHTTP()` with the corresponding parameters. This can be used to abort a request if the middleware writer wants to.
+
+*/
+package mux
diff --git a/vendor/github.com/gorilla/mux/middleware.go b/vendor/github.com/gorilla/mux/middleware.go
new file mode 100644
index 0000000..8f89867
--- /dev/null
+++ b/vendor/github.com/gorilla/mux/middleware.go
@@ -0,0 +1,28 @@
+package mux
+
+import "net/http"
+
+// MiddlewareFunc is a function which receives an http.Handler and returns another http.Handler.
+// Typically, the returned handler is a closure which does something with the http.ResponseWriter and http.Request passed
+// to it, and then calls the handler passed as parameter to the MiddlewareFunc.
+type MiddlewareFunc func(http.Handler) http.Handler
+
+// middleware interface is anything which implements a MiddlewareFunc named Middleware.
+type middleware interface {
+	Middleware(handler http.Handler) http.Handler
+}
+
+// MiddlewareFunc also implements the middleware interface.
+func (mw MiddlewareFunc) Middleware(handler http.Handler) http.Handler {
+	return mw(handler)
+}
+
+// Use appends a MiddlewareFunc to the chain. Middleware can be used to intercept or otherwise modify requests and/or responses, and are executed in the order that they are applied to the Router.
+func (r *Router) Use(mwf MiddlewareFunc) {
+	r.middlewares = append(r.middlewares, mwf)
+}
+
+// useInterface appends a middleware to the chain. Middleware can be used to intercept or otherwise modify requests and/or responses, and are executed in the order that they are applied to the Router.
+func (r *Router) useInterface(mw middleware) {
+	r.middlewares = append(r.middlewares, mw)
+}
diff --git a/vendor/github.com/gorilla/mux/mux.go b/vendor/github.com/gorilla/mux/mux.go
new file mode 100644
index 0000000..efabd24
--- /dev/null
+++ b/vendor/github.com/gorilla/mux/mux.go
@@ -0,0 +1,585 @@
+// Copyright 2012 The Gorilla Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package mux
+
+import (
+	"errors"
+	"fmt"
+	"net/http"
+	"path"
+	"regexp"
+)
+
+var (
+	ErrMethodMismatch = errors.New("method is not allowed")
+	ErrNotFound       = errors.New("no matching route was found")
+)
+
+// NewRouter returns a new router instance.
+func NewRouter() *Router {
+	return &Router{namedRoutes: make(map[string]*Route), KeepContext: false}
+}
+
+// Router registers routes to be matched and dispatches a handler.
+//
+// It implements the http.Handler interface, so it can be registered to serve
+// requests:
+//
+//     var router = mux.NewRouter()
+//
+//     func main() {
+//         http.Handle("/", router)
+//     }
+//
+// Or, for Google App Engine, register it in a init() function:
+//
+//     func init() {
+//         http.Handle("/", router)
+//     }
+//
+// This will send all incoming requests to the router.
+type Router struct {
+	// Configurable Handler to be used when no route matches.
+	NotFoundHandler http.Handler
+
+	// Configurable Handler to be used when the request method does not match the route.
+	MethodNotAllowedHandler http.Handler
+
+	// Parent route, if this is a subrouter.
+	parent parentRoute
+	// Routes to be matched, in order.
+	routes []*Route
+	// Routes by name for URL building.
+	namedRoutes map[string]*Route
+	// See Router.StrictSlash(). This defines the flag for new routes.
+	strictSlash bool
+	// See Router.SkipClean(). This defines the flag for new routes.
+	skipClean bool
+	// If true, do not clear the request context after handling the request.
+	// This has no effect when go1.7+ is used, since the context is stored
+	// on the request itself.
+	KeepContext bool
+	// see Router.UseEncodedPath(). This defines a flag for all routes.
+	useEncodedPath bool
+	// Slice of middlewares to be called after a match is found
+	middlewares []middleware
+}
+
+// Match attempts to match the given request against the router's registered routes.
+//
+// If the request matches a route of this router or one of its subrouters the Route,
+// Handler, and Vars fields of the the match argument are filled and this function
+// returns true.
+//
+// If the request does not match any of this router's or its subrouters' routes
+// then this function returns false. If available, a reason for the match failure
+// will be filled in the match argument's MatchErr field. If the match failure type
+// (eg: not found) has a registered handler, the handler is assigned to the Handler
+// field of the match argument.
+func (r *Router) Match(req *http.Request, match *RouteMatch) bool {
+	for _, route := range r.routes {
+		if route.Match(req, match) {
+			// Build middleware chain if no error was found
+			if match.MatchErr == nil {
+				for i := len(r.middlewares) - 1; i >= 0; i-- {
+					match.Handler = r.middlewares[i].Middleware(match.Handler)
+				}
+			}
+			return true
+		}
+	}
+
+	if match.MatchErr == ErrMethodMismatch {
+		if r.MethodNotAllowedHandler != nil {
+			match.Handler = r.MethodNotAllowedHandler
+			return true
+		} else {
+			return false
+		}
+	}
+
+	// Closest match for a router (includes sub-routers)
+	if r.NotFoundHandler != nil {
+		match.Handler = r.NotFoundHandler
+		match.MatchErr = ErrNotFound
+		return true
+	}
+
+	match.MatchErr = ErrNotFound
+	return false
+}
+
+// ServeHTTP dispatches the handler registered in the matched route.
+//
+// When there is a match, the route variables can be retrieved calling
+// mux.Vars(request).
+func (r *Router) ServeHTTP(w http.ResponseWriter, req *http.Request) {
+	if !r.skipClean {
+		path := req.URL.Path
+		if r.useEncodedPath {
+			path = req.URL.EscapedPath()
+		}
+		// Clean path to canonical form and redirect.
+		if p := cleanPath(path); p != path {
+
+			// Added 3 lines (Philip Schlump) - It was dropping the query string and #whatever from query.
+			// This matches with fix in go 1.2 r.c. 4 for same problem.  Go Issue:
+			// http://code.google.com/p/go/issues/detail?id=5252
+			url := *req.URL
+			url.Path = p
+			p = url.String()
+
+			w.Header().Set("Location", p)
+			w.WriteHeader(http.StatusMovedPermanently)
+			return
+		}
+	}
+	var match RouteMatch
+	var handler http.Handler
+	if r.Match(req, &match) {
+		handler = match.Handler
+		req = setVars(req, match.Vars)
+		req = setCurrentRoute(req, match.Route)
+	}
+
+	if handler == nil && match.MatchErr == ErrMethodMismatch {
+		handler = methodNotAllowedHandler()
+	}
+
+	if handler == nil {
+		handler = http.NotFoundHandler()
+	}
+
+	if !r.KeepContext {
+		defer contextClear(req)
+	}
+
+	handler.ServeHTTP(w, req)
+}
+
+// Get returns a route registered with the given name.
+func (r *Router) Get(name string) *Route {
+	return r.getNamedRoutes()[name]
+}
+
+// GetRoute returns a route registered with the given name. This method
+// was renamed to Get() and remains here for backwards compatibility.
+func (r *Router) GetRoute(name string) *Route {
+	return r.getNamedRoutes()[name]
+}
+
+// StrictSlash defines the trailing slash behavior for new routes. The initial
+// value is false.
+//
+// When true, if the route path is "/path/", accessing "/path" will perform a redirect
+// to the former and vice versa. In other words, your application will always
+// see the path as specified in the route.
+//
+// When false, if the route path is "/path", accessing "/path/" will not match
+// this route and vice versa.
+//
+// The re-direct is a HTTP 301 (Moved Permanently). Note that when this is set for
+// routes with a non-idempotent method (e.g. POST, PUT), the subsequent re-directed
+// request will be made as a GET by most clients. Use middleware or client settings
+// to modify this behaviour as needed.
+//
+// Special case: when a route sets a path prefix using the PathPrefix() method,
+// strict slash is ignored for that route because the redirect behavior can't
+// be determined from a prefix alone. However, any subrouters created from that
+// route inherit the original StrictSlash setting.
+func (r *Router) StrictSlash(value bool) *Router {
+	r.strictSlash = value
+	return r
+}
+
+// SkipClean defines the path cleaning behaviour for new routes. The initial
+// value is false. Users should be careful about which routes are not cleaned
+//
+// When true, if the route path is "/path//to", it will remain with the double
+// slash. This is helpful if you have a route like: /fetch/http://xkcd.com/534/
+//
+// When false, the path will be cleaned, so /fetch/http://xkcd.com/534/ will
+// become /fetch/http/xkcd.com/534
+func (r *Router) SkipClean(value bool) *Router {
+	r.skipClean = value
+	return r
+}
+
+// UseEncodedPath tells the router to match the encoded original path
+// to the routes.
+// For eg. "/path/foo%2Fbar/to" will match the path "/path/{var}/to".
+//
+// If not called, the router will match the unencoded path to the routes.
+// For eg. "/path/foo%2Fbar/to" will match the path "/path/foo/bar/to"
+func (r *Router) UseEncodedPath() *Router {
+	r.useEncodedPath = true
+	return r
+}
+
+// ----------------------------------------------------------------------------
+// parentRoute
+// ----------------------------------------------------------------------------
+
+func (r *Router) getBuildScheme() string {
+	if r.parent != nil {
+		return r.parent.getBuildScheme()
+	}
+	return ""
+}
+
+// getNamedRoutes returns the map where named routes are registered.
+func (r *Router) getNamedRoutes() map[string]*Route {
+	if r.namedRoutes == nil {
+		if r.parent != nil {
+			r.namedRoutes = r.parent.getNamedRoutes()
+		} else {
+			r.namedRoutes = make(map[string]*Route)
+		}
+	}
+	return r.namedRoutes
+}
+
+// getRegexpGroup returns regexp definitions from the parent route, if any.
+func (r *Router) getRegexpGroup() *routeRegexpGroup {
+	if r.parent != nil {
+		return r.parent.getRegexpGroup()
+	}
+	return nil
+}
+
+func (r *Router) buildVars(m map[string]string) map[string]string {
+	if r.parent != nil {
+		m = r.parent.buildVars(m)
+	}
+	return m
+}
+
+// ----------------------------------------------------------------------------
+// Route factories
+// ----------------------------------------------------------------------------
+
+// NewRoute registers an empty route.
+func (r *Router) NewRoute() *Route {
+	route := &Route{parent: r, strictSlash: r.strictSlash, skipClean: r.skipClean, useEncodedPath: r.useEncodedPath}
+	r.routes = append(r.routes, route)
+	return route
+}
+
+// Handle registers a new route with a matcher for the URL path.
+// See Route.Path() and Route.Handler().
+func (r *Router) Handle(path string, handler http.Handler) *Route {
+	return r.NewRoute().Path(path).Handler(handler)
+}
+
+// HandleFunc registers a new route with a matcher for the URL path.
+// See Route.Path() and Route.HandlerFunc().
+func (r *Router) HandleFunc(path string, f func(http.ResponseWriter,
+	*http.Request)) *Route {
+	return r.NewRoute().Path(path).HandlerFunc(f)
+}
+
+// Headers registers a new route with a matcher for request header values.
+// See Route.Headers().
+func (r *Router) Headers(pairs ...string) *Route {
+	return r.NewRoute().Headers(pairs...)
+}
+
+// Host registers a new route with a matcher for the URL host.
+// See Route.Host().
+func (r *Router) Host(tpl string) *Route {
+	return r.NewRoute().Host(tpl)
+}
+
+// MatcherFunc registers a new route with a custom matcher function.
+// See Route.MatcherFunc().
+func (r *Router) MatcherFunc(f MatcherFunc) *Route {
+	return r.NewRoute().MatcherFunc(f)
+}
+
+// Methods registers a new route with a matcher for HTTP methods.
+// See Route.Methods().
+func (r *Router) Methods(methods ...string) *Route {
+	return r.NewRoute().Methods(methods...)
+}
+
+// Path registers a new route with a matcher for the URL path.
+// See Route.Path().
+func (r *Router) Path(tpl string) *Route {
+	return r.NewRoute().Path(tpl)
+}
+
+// PathPrefix registers a new route with a matcher for the URL path prefix.
+// See Route.PathPrefix().
+func (r *Router) PathPrefix(tpl string) *Route {
+	return r.NewRoute().PathPrefix(tpl)
+}
+
+// Queries registers a new route with a matcher for URL query values.
+// See Route.Queries().
+func (r *Router) Queries(pairs ...string) *Route {
+	return r.NewRoute().Queries(pairs...)
+}
+
+// Schemes registers a new route with a matcher for URL schemes.
+// See Route.Schemes().
+func (r *Router) Schemes(schemes ...string) *Route {
+	return r.NewRoute().Schemes(schemes...)
+}
+
+// BuildVarsFunc registers a new route with a custom function for modifying
+// route variables before building a URL.
+func (r *Router) BuildVarsFunc(f BuildVarsFunc) *Route {
+	return r.NewRoute().BuildVarsFunc(f)
+}
+
+// Walk walks the router and all its sub-routers, calling walkFn for each route
+// in the tree. The routes are walked in the order they were added. Sub-routers
+// are explored depth-first.
+func (r *Router) Walk(walkFn WalkFunc) error {
+	return r.walk(walkFn, []*Route{})
+}
+
+// SkipRouter is used as a return value from WalkFuncs to indicate that the
+// router that walk is about to descend down to should be skipped.
+var SkipRouter = errors.New("skip this router")
+
+// WalkFunc is the type of the function called for each route visited by Walk.
+// At every invocation, it is given the current route, and the current router,
+// and a list of ancestor routes that lead to the current route.
+type WalkFunc func(route *Route, router *Router, ancestors []*Route) error
+
+func (r *Router) walk(walkFn WalkFunc, ancestors []*Route) error {
+	for _, t := range r.routes {
+		err := walkFn(t, r, ancestors)
+		if err == SkipRouter {
+			continue
+		}
+		if err != nil {
+			return err
+		}
+		for _, sr := range t.matchers {
+			if h, ok := sr.(*Router); ok {
+				ancestors = append(ancestors, t)
+				err := h.walk(walkFn, ancestors)
+				if err != nil {
+					return err
+				}
+				ancestors = ancestors[:len(ancestors)-1]
+			}
+		}
+		if h, ok := t.handler.(*Router); ok {
+			ancestors = append(ancestors, t)
+			err := h.walk(walkFn, ancestors)
+			if err != nil {
+				return err
+			}
+			ancestors = ancestors[:len(ancestors)-1]
+		}
+	}
+	return nil
+}
+
+// ----------------------------------------------------------------------------
+// Context
+// ----------------------------------------------------------------------------
+
+// RouteMatch stores information about a matched route.
+type RouteMatch struct {
+	Route   *Route
+	Handler http.Handler
+	Vars    map[string]string
+
+	// MatchErr is set to appropriate matching error
+	// It is set to ErrMethodMismatch if there is a mismatch in
+	// the request method and route method
+	MatchErr error
+}
+
+type contextKey int
+
+const (
+	varsKey contextKey = iota
+	routeKey
+)
+
+// Vars returns the route variables for the current request, if any.
+func Vars(r *http.Request) map[string]string {
+	if rv := contextGet(r, varsKey); rv != nil {
+		return rv.(map[string]string)
+	}
+	return nil
+}
+
+// CurrentRoute returns the matched route for the current request, if any.
+// This only works when called inside the handler of the matched route
+// because the matched route is stored in the request context which is cleared
+// after the handler returns, unless the KeepContext option is set on the
+// Router.
+func CurrentRoute(r *http.Request) *Route {
+	if rv := contextGet(r, routeKey); rv != nil {
+		return rv.(*Route)
+	}
+	return nil
+}
+
+func setVars(r *http.Request, val interface{}) *http.Request {
+	return contextSet(r, varsKey, val)
+}
+
+func setCurrentRoute(r *http.Request, val interface{}) *http.Request {
+	return contextSet(r, routeKey, val)
+}
+
+// ----------------------------------------------------------------------------
+// Helpers
+// ----------------------------------------------------------------------------
+
+// cleanPath returns the canonical path for p, eliminating . and .. elements.
+// Borrowed from the net/http package.
+func cleanPath(p string) string {
+	if p == "" {
+		return "/"
+	}
+	if p[0] != '/' {
+		p = "/" + p
+	}
+	np := path.Clean(p)
+	// path.Clean removes trailing slash except for root;
+	// put the trailing slash back if necessary.
+	if p[len(p)-1] == '/' && np != "/" {
+		np += "/"
+	}
+
+	return np
+}
+
+// uniqueVars returns an error if two slices contain duplicated strings.
+func uniqueVars(s1, s2 []string) error {
+	for _, v1 := range s1 {
+		for _, v2 := range s2 {
+			if v1 == v2 {
+				return fmt.Errorf("mux: duplicated route variable %q", v2)
+			}
+		}
+	}
+	return nil
+}
+
+// checkPairs returns the count of strings passed in, and an error if
+// the count is not an even number.
+func checkPairs(pairs ...string) (int, error) {
+	length := len(pairs)
+	if length%2 != 0 {
+		return length, fmt.Errorf(
+			"mux: number of parameters must be multiple of 2, got %v", pairs)
+	}
+	return length, nil
+}
+
+// mapFromPairsToString converts variadic string parameters to a
+// string to string map.
+func mapFromPairsToString(pairs ...string) (map[string]string, error) {
+	length, err := checkPairs(pairs...)
+	if err != nil {
+		return nil, err
+	}
+	m := make(map[string]string, length/2)
+	for i := 0; i < length; i += 2 {
+		m[pairs[i]] = pairs[i+1]
+	}
+	return m, nil
+}
+
+// mapFromPairsToRegex converts variadic string parameters to a
+// string to regex map.
+func mapFromPairsToRegex(pairs ...string) (map[string]*regexp.Regexp, error) {
+	length, err := checkPairs(pairs...)
+	if err != nil {
+		return nil, err
+	}
+	m := make(map[string]*regexp.Regexp, length/2)
+	for i := 0; i < length; i += 2 {
+		regex, err := regexp.Compile(pairs[i+1])
+		if err != nil {
+			return nil, err
+		}
+		m[pairs[i]] = regex
+	}
+	return m, nil
+}
+
+// matchInArray returns true if the given string value is in the array.
+func matchInArray(arr []string, value string) bool {
+	for _, v := range arr {
+		if v == value {
+			return true
+		}
+	}
+	return false
+}
+
+// matchMapWithString returns true if the given key/value pairs exist in a given map.
+func matchMapWithString(toCheck map[string]string, toMatch map[string][]string, canonicalKey bool) bool {
+	for k, v := range toCheck {
+		// Check if key exists.
+		if canonicalKey {
+			k = http.CanonicalHeaderKey(k)
+		}
+		if values := toMatch[k]; values == nil {
+			return false
+		} else if v != "" {
+			// If value was defined as an empty string we only check that the
+			// key exists. Otherwise we also check for equality.
+			valueExists := false
+			for _, value := range values {
+				if v == value {
+					valueExists = true
+					break
+				}
+			}
+			if !valueExists {
+				return false
+			}
+		}
+	}
+	return true
+}
+
+// matchMapWithRegex returns true if the given key/value pairs exist in a given map compiled against
+// the given regex
+func matchMapWithRegex(toCheck map[string]*regexp.Regexp, toMatch map[string][]string, canonicalKey bool) bool {
+	for k, v := range toCheck {
+		// Check if key exists.
+		if canonicalKey {
+			k = http.CanonicalHeaderKey(k)
+		}
+		if values := toMatch[k]; values == nil {
+			return false
+		} else if v != nil {
+			// If value was defined as an empty string we only check that the
+			// key exists. Otherwise we also check for equality.
+			valueExists := false
+			for _, value := range values {
+				if v.MatchString(value) {
+					valueExists = true
+					break
+				}
+			}
+			if !valueExists {
+				return false
+			}
+		}
+	}
+	return true
+}
+
+// methodNotAllowed replies to the request with an HTTP status code 405.
+func methodNotAllowed(w http.ResponseWriter, r *http.Request) {
+	w.WriteHeader(http.StatusMethodNotAllowed)
+}
+
+// methodNotAllowedHandler returns a simple request handler
+// that replies to each request with a status code 405.
+func methodNotAllowedHandler() http.Handler { return http.HandlerFunc(methodNotAllowed) }
diff --git a/vendor/github.com/gorilla/mux/regexp.go b/vendor/github.com/gorilla/mux/regexp.go
new file mode 100644
index 0000000..2b57e56
--- /dev/null
+++ b/vendor/github.com/gorilla/mux/regexp.go
@@ -0,0 +1,332 @@
+// Copyright 2012 The Gorilla Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package mux
+
+import (
+	"bytes"
+	"fmt"
+	"net/http"
+	"net/url"
+	"regexp"
+	"strconv"
+	"strings"
+)
+
+type routeRegexpOptions struct {
+	strictSlash    bool
+	useEncodedPath bool
+}
+
+type regexpType int
+
+const (
+	regexpTypePath   regexpType = 0
+	regexpTypeHost   regexpType = 1
+	regexpTypePrefix regexpType = 2
+	regexpTypeQuery  regexpType = 3
+)
+
+// newRouteRegexp parses a route template and returns a routeRegexp,
+// used to match a host, a path or a query string.
+//
+// It will extract named variables, assemble a regexp to be matched, create
+// a "reverse" template to build URLs and compile regexps to validate variable
+// values used in URL building.
+//
+// Previously we accepted only Python-like identifiers for variable
+// names ([a-zA-Z_][a-zA-Z0-9_]*), but currently the only restriction is that
+// name and pattern can't be empty, and names can't contain a colon.
+func newRouteRegexp(tpl string, typ regexpType, options routeRegexpOptions) (*routeRegexp, error) {
+	// Check if it is well-formed.
+	idxs, errBraces := braceIndices(tpl)
+	if errBraces != nil {
+		return nil, errBraces
+	}
+	// Backup the original.
+	template := tpl
+	// Now let's parse it.
+	defaultPattern := "[^/]+"
+	if typ == regexpTypeQuery {
+		defaultPattern = ".*"
+	} else if typ == regexpTypeHost {
+		defaultPattern = "[^.]+"
+	}
+	// Only match strict slash if not matching
+	if typ != regexpTypePath {
+		options.strictSlash = false
+	}
+	// Set a flag for strictSlash.
+	endSlash := false
+	if options.strictSlash && strings.HasSuffix(tpl, "/") {
+		tpl = tpl[:len(tpl)-1]
+		endSlash = true
+	}
+	varsN := make([]string, len(idxs)/2)
+	varsR := make([]*regexp.Regexp, len(idxs)/2)
+	pattern := bytes.NewBufferString("")
+	pattern.WriteByte('^')
+	reverse := bytes.NewBufferString("")
+	var end int
+	var err error
+	for i := 0; i < len(idxs); i += 2 {
+		// Set all values we are interested in.
+		raw := tpl[end:idxs[i]]
+		end = idxs[i+1]
+		parts := strings.SplitN(tpl[idxs[i]+1:end-1], ":", 2)
+		name := parts[0]
+		patt := defaultPattern
+		if len(parts) == 2 {
+			patt = parts[1]
+		}
+		// Name or pattern can't be empty.
+		if name == "" || patt == "" {
+			return nil, fmt.Errorf("mux: missing name or pattern in %q",
+				tpl[idxs[i]:end])
+		}
+		// Build the regexp pattern.
+		fmt.Fprintf(pattern, "%s(?P<%s>%s)", regexp.QuoteMeta(raw), varGroupName(i/2), patt)
+
+		// Build the reverse template.
+		fmt.Fprintf(reverse, "%s%%s", raw)
+
+		// Append variable name and compiled pattern.
+		varsN[i/2] = name
+		varsR[i/2], err = regexp.Compile(fmt.Sprintf("^%s$", patt))
+		if err != nil {
+			return nil, err
+		}
+	}
+	// Add the remaining.
+	raw := tpl[end:]
+	pattern.WriteString(regexp.QuoteMeta(raw))
+	if options.strictSlash {
+		pattern.WriteString("[/]?")
+	}
+	if typ == regexpTypeQuery {
+		// Add the default pattern if the query value is empty
+		if queryVal := strings.SplitN(template, "=", 2)[1]; queryVal == "" {
+			pattern.WriteString(defaultPattern)
+		}
+	}
+	if typ != regexpTypePrefix {
+		pattern.WriteByte('$')
+	}
+	reverse.WriteString(raw)
+	if endSlash {
+		reverse.WriteByte('/')
+	}
+	// Compile full regexp.
+	reg, errCompile := regexp.Compile(pattern.String())
+	if errCompile != nil {
+		return nil, errCompile
+	}
+
+	// Check for capturing groups which used to work in older versions
+	if reg.NumSubexp() != len(idxs)/2 {
+		panic(fmt.Sprintf("route %s contains capture groups in its regexp. ", template) +
+			"Only non-capturing groups are accepted: e.g. (?:pattern) instead of (pattern)")
+	}
+
+	// Done!
+	return &routeRegexp{
+		template:   template,
+		regexpType: typ,
+		options:    options,
+		regexp:     reg,
+		reverse:    reverse.String(),
+		varsN:      varsN,
+		varsR:      varsR,
+	}, nil
+}
+
+// routeRegexp stores a regexp to match a host or path and information to
+// collect and validate route variables.
+type routeRegexp struct {
+	// The unmodified template.
+	template string
+	// The type of match
+	regexpType regexpType
+	// Options for matching
+	options routeRegexpOptions
+	// Expanded regexp.
+	regexp *regexp.Regexp
+	// Reverse template.
+	reverse string
+	// Variable names.
+	varsN []string
+	// Variable regexps (validators).
+	varsR []*regexp.Regexp
+}
+
+// Match matches the regexp against the URL host or path.
+func (r *routeRegexp) Match(req *http.Request, match *RouteMatch) bool {
+	if r.regexpType != regexpTypeHost {
+		if r.regexpType == regexpTypeQuery {
+			return r.matchQueryString(req)
+		}
+		path := req.URL.Path
+		if r.options.useEncodedPath {
+			path = req.URL.EscapedPath()
+		}
+		return r.regexp.MatchString(path)
+	}
+
+	return r.regexp.MatchString(getHost(req))
+}
+
+// url builds a URL part using the given values.
+func (r *routeRegexp) url(values map[string]string) (string, error) {
+	urlValues := make([]interface{}, len(r.varsN))
+	for k, v := range r.varsN {
+		value, ok := values[v]
+		if !ok {
+			return "", fmt.Errorf("mux: missing route variable %q", v)
+		}
+		if r.regexpType == regexpTypeQuery {
+			value = url.QueryEscape(value)
+		}
+		urlValues[k] = value
+	}
+	rv := fmt.Sprintf(r.reverse, urlValues...)
+	if !r.regexp.MatchString(rv) {
+		// The URL is checked against the full regexp, instead of checking
+		// individual variables. This is faster but to provide a good error
+		// message, we check individual regexps if the URL doesn't match.
+		for k, v := range r.varsN {
+			if !r.varsR[k].MatchString(values[v]) {
+				return "", fmt.Errorf(
+					"mux: variable %q doesn't match, expected %q", values[v],
+					r.varsR[k].String())
+			}
+		}
+	}
+	return rv, nil
+}
+
+// getURLQuery returns a single query parameter from a request URL.
+// For a URL with foo=bar&baz=ding, we return only the relevant key
+// value pair for the routeRegexp.
+func (r *routeRegexp) getURLQuery(req *http.Request) string {
+	if r.regexpType != regexpTypeQuery {
+		return ""
+	}
+	templateKey := strings.SplitN(r.template, "=", 2)[0]
+	for key, vals := range req.URL.Query() {
+		if key == templateKey && len(vals) > 0 {
+			return key + "=" + vals[0]
+		}
+	}
+	return ""
+}
+
+func (r *routeRegexp) matchQueryString(req *http.Request) bool {
+	return r.regexp.MatchString(r.getURLQuery(req))
+}
+
+// braceIndices returns the first level curly brace indices from a string.
+// It returns an error in case of unbalanced braces.
+func braceIndices(s string) ([]int, error) {
+	var level, idx int
+	var idxs []int
+	for i := 0; i < len(s); i++ {
+		switch s[i] {
+		case '{':
+			if level++; level == 1 {
+				idx = i
+			}
+		case '}':
+			if level--; level == 0 {
+				idxs = append(idxs, idx, i+1)
+			} else if level < 0 {
+				return nil, fmt.Errorf("mux: unbalanced braces in %q", s)
+			}
+		}
+	}
+	if level != 0 {
+		return nil, fmt.Errorf("mux: unbalanced braces in %q", s)
+	}
+	return idxs, nil
+}
+
+// varGroupName builds a capturing group name for the indexed variable.
+func varGroupName(idx int) string {
+	return "v" + strconv.Itoa(idx)
+}
+
+// ----------------------------------------------------------------------------
+// routeRegexpGroup
+// ----------------------------------------------------------------------------
+
+// routeRegexpGroup groups the route matchers that carry variables.
+type routeRegexpGroup struct {
+	host    *routeRegexp
+	path    *routeRegexp
+	queries []*routeRegexp
+}
+
+// setMatch extracts the variables from the URL once a route matches.
+func (v *routeRegexpGroup) setMatch(req *http.Request, m *RouteMatch, r *Route) {
+	// Store host variables.
+	if v.host != nil {
+		host := getHost(req)
+		matches := v.host.regexp.FindStringSubmatchIndex(host)
+		if len(matches) > 0 {
+			extractVars(host, matches, v.host.varsN, m.Vars)
+		}
+	}
+	path := req.URL.Path
+	if r.useEncodedPath {
+		path = req.URL.EscapedPath()
+	}
+	// Store path variables.
+	if v.path != nil {
+		matches := v.path.regexp.FindStringSubmatchIndex(path)
+		if len(matches) > 0 {
+			extractVars(path, matches, v.path.varsN, m.Vars)
+			// Check if we should redirect.
+			if v.path.options.strictSlash {
+				p1 := strings.HasSuffix(path, "/")
+				p2 := strings.HasSuffix(v.path.template, "/")
+				if p1 != p2 {
+					u, _ := url.Parse(req.URL.String())
+					if p1 {
+						u.Path = u.Path[:len(u.Path)-1]
+					} else {
+						u.Path += "/"
+					}
+					m.Handler = http.RedirectHandler(u.String(), 301)
+				}
+			}
+		}
+	}
+	// Store query string variables.
+	for _, q := range v.queries {
+		queryURL := q.getURLQuery(req)
+		matches := q.regexp.FindStringSubmatchIndex(queryURL)
+		if len(matches) > 0 {
+			extractVars(queryURL, matches, q.varsN, m.Vars)
+		}
+	}
+}
+
+// getHost tries its best to return the request host.
+func getHost(r *http.Request) string {
+	if r.URL.IsAbs() {
+		return r.URL.Host
+	}
+	host := r.Host
+	// Slice off any port information.
+	if i := strings.Index(host, ":"); i != -1 {
+		host = host[:i]
+	}
+	return host
+
+}
+
+func extractVars(input string, matches []int, names []string, output map[string]string) {
+	for i, name := range names {
+		output[name] = input[matches[2*i+2]:matches[2*i+3]]
+	}
+}
diff --git a/vendor/github.com/gorilla/mux/route.go b/vendor/github.com/gorilla/mux/route.go
new file mode 100644
index 0000000..4ce098d
--- /dev/null
+++ b/vendor/github.com/gorilla/mux/route.go
@@ -0,0 +1,761 @@
+// Copyright 2012 The Gorilla Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package mux
+
+import (
+	"errors"
+	"fmt"
+	"net/http"
+	"net/url"
+	"regexp"
+	"strings"
+)
+
+// Route stores information to match a request and build URLs.
+type Route struct {
+	// Parent where the route was registered (a Router).
+	parent parentRoute
+	// Request handler for the route.
+	handler http.Handler
+	// List of matchers.
+	matchers []matcher
+	// Manager for the variables from host and path.
+	regexp *routeRegexpGroup
+	// If true, when the path pattern is "/path/", accessing "/path" will
+	// redirect to the former and vice versa.
+	strictSlash bool
+	// If true, when the path pattern is "/path//to", accessing "/path//to"
+	// will not redirect
+	skipClean bool
+	// If true, "/path/foo%2Fbar/to" will match the path "/path/{var}/to"
+	useEncodedPath bool
+	// The scheme used when building URLs.
+	buildScheme string
+	// If true, this route never matches: it is only used to build URLs.
+	buildOnly bool
+	// The name used to build URLs.
+	name string
+	// Error resulted from building a route.
+	err error
+
+	buildVarsFunc BuildVarsFunc
+}
+
+func (r *Route) SkipClean() bool {
+	return r.skipClean
+}
+
+// Match matches the route against the request.
+func (r *Route) Match(req *http.Request, match *RouteMatch) bool {
+	if r.buildOnly || r.err != nil {
+		return false
+	}
+
+	var matchErr error
+
+	// Match everything.
+	for _, m := range r.matchers {
+		if matched := m.Match(req, match); !matched {
+			if _, ok := m.(methodMatcher); ok {
+				matchErr = ErrMethodMismatch
+				continue
+			}
+			matchErr = nil
+			return false
+		}
+	}
+
+	if matchErr != nil {
+		match.MatchErr = matchErr
+		return false
+	}
+
+	if match.MatchErr == ErrMethodMismatch {
+		// We found a route which matches request method, clear MatchErr
+		match.MatchErr = nil
+		// Then override the mis-matched handler
+		match.Handler = r.handler
+	}
+
+	// Yay, we have a match. Let's collect some info about it.
+	if match.Route == nil {
+		match.Route = r
+	}
+	if match.Handler == nil {
+		match.Handler = r.handler
+	}
+	if match.Vars == nil {
+		match.Vars = make(map[string]string)
+	}
+
+	// Set variables.
+	if r.regexp != nil {
+		r.regexp.setMatch(req, match, r)
+	}
+	return true
+}
+
+// ----------------------------------------------------------------------------
+// Route attributes
+// ----------------------------------------------------------------------------
+
+// GetError returns an error resulted from building the route, if any.
+func (r *Route) GetError() error {
+	return r.err
+}
+
+// BuildOnly sets the route to never match: it is only used to build URLs.
+func (r *Route) BuildOnly() *Route {
+	r.buildOnly = true
+	return r
+}
+
+// Handler --------------------------------------------------------------------
+
+// Handler sets a handler for the route.
+func (r *Route) Handler(handler http.Handler) *Route {
+	if r.err == nil {
+		r.handler = handler
+	}
+	return r
+}
+
+// HandlerFunc sets a handler function for the route.
+func (r *Route) HandlerFunc(f func(http.ResponseWriter, *http.Request)) *Route {
+	return r.Handler(http.HandlerFunc(f))
+}
+
+// GetHandler returns the handler for the route, if any.
+func (r *Route) GetHandler() http.Handler {
+	return r.handler
+}
+
+// Name -----------------------------------------------------------------------
+
+// Name sets the name for the route, used to build URLs.
+// If the name was registered already it will be overwritten.
+func (r *Route) Name(name string) *Route {
+	if r.name != "" {
+		r.err = fmt.Errorf("mux: route already has name %q, can't set %q",
+			r.name, name)
+	}
+	if r.err == nil {
+		r.name = name
+		r.getNamedRoutes()[name] = r
+	}
+	return r
+}
+
+// GetName returns the name for the route, if any.
+func (r *Route) GetName() string {
+	return r.name
+}
+
+// ----------------------------------------------------------------------------
+// Matchers
+// ----------------------------------------------------------------------------
+
+// matcher types try to match a request.
+type matcher interface {
+	Match(*http.Request, *RouteMatch) bool
+}
+
+// addMatcher adds a matcher to the route.
+func (r *Route) addMatcher(m matcher) *Route {
+	if r.err == nil {
+		r.matchers = append(r.matchers, m)
+	}
+	return r
+}
+
+// addRegexpMatcher adds a host or path matcher and builder to a route.
+func (r *Route) addRegexpMatcher(tpl string, typ regexpType) error {
+	if r.err != nil {
+		return r.err
+	}
+	r.regexp = r.getRegexpGroup()
+	if typ == regexpTypePath || typ == regexpTypePrefix {
+		if len(tpl) > 0 && tpl[0] != '/' {
+			return fmt.Errorf("mux: path must start with a slash, got %q", tpl)
+		}
+		if r.regexp.path != nil {
+			tpl = strings.TrimRight(r.regexp.path.template, "/") + tpl
+		}
+	}
+	rr, err := newRouteRegexp(tpl, typ, routeRegexpOptions{
+		strictSlash:    r.strictSlash,
+		useEncodedPath: r.useEncodedPath,
+	})
+	if err != nil {
+		return err
+	}
+	for _, q := range r.regexp.queries {
+		if err = uniqueVars(rr.varsN, q.varsN); err != nil {
+			return err
+		}
+	}
+	if typ == regexpTypeHost {
+		if r.regexp.path != nil {
+			if err = uniqueVars(rr.varsN, r.regexp.path.varsN); err != nil {
+				return err
+			}
+		}
+		r.regexp.host = rr
+	} else {
+		if r.regexp.host != nil {
+			if err = uniqueVars(rr.varsN, r.regexp.host.varsN); err != nil {
+				return err
+			}
+		}
+		if typ == regexpTypeQuery {
+			r.regexp.queries = append(r.regexp.queries, rr)
+		} else {
+			r.regexp.path = rr
+		}
+	}
+	r.addMatcher(rr)
+	return nil
+}
+
+// Headers --------------------------------------------------------------------
+
+// headerMatcher matches the request against header values.
+type headerMatcher map[string]string
+
+func (m headerMatcher) Match(r *http.Request, match *RouteMatch) bool {
+	return matchMapWithString(m, r.Header, true)
+}
+
+// Headers adds a matcher for request header values.
+// It accepts a sequence of key/value pairs to be matched. For example:
+//
+//     r := mux.NewRouter()
+//     r.Headers("Content-Type", "application/json",
+//               "X-Requested-With", "XMLHttpRequest")
+//
+// The above route will only match if both request header values match.
+// If the value is an empty string, it will match any value if the key is set.
+func (r *Route) Headers(pairs ...string) *Route {
+	if r.err == nil {
+		var headers map[string]string
+		headers, r.err = mapFromPairsToString(pairs...)
+		return r.addMatcher(headerMatcher(headers))
+	}
+	return r
+}
+
+// headerRegexMatcher matches the request against the route given a regex for the header
+type headerRegexMatcher map[string]*regexp.Regexp
+
+func (m headerRegexMatcher) Match(r *http.Request, match *RouteMatch) bool {
+	return matchMapWithRegex(m, r.Header, true)
+}
+
+// HeadersRegexp accepts a sequence of key/value pairs, where the value has regex
+// support. For example:
+//
+//     r := mux.NewRouter()
+//     r.HeadersRegexp("Content-Type", "application/(text|json)",
+//               "X-Requested-With", "XMLHttpRequest")
+//
+// The above route will only match if both the request header matches both regular expressions.
+// If the value is an empty string, it will match any value if the key is set.
+// Use the start and end of string anchors (^ and $) to match an exact value.
+func (r *Route) HeadersRegexp(pairs ...string) *Route {
+	if r.err == nil {
+		var headers map[string]*regexp.Regexp
+		headers, r.err = mapFromPairsToRegex(pairs...)
+		return r.addMatcher(headerRegexMatcher(headers))
+	}
+	return r
+}
+
+// Host -----------------------------------------------------------------------
+
+// Host adds a matcher for the URL host.
+// It accepts a template with zero or more URL variables enclosed by {}.
+// Variables can define an optional regexp pattern to be matched:
+//
+// - {name} matches anything until the next dot.
+//
+// - {name:pattern} matches the given regexp pattern.
+//
+// For example:
+//
+//     r := mux.NewRouter()
+//     r.Host("www.example.com")
+//     r.Host("{subdomain}.domain.com")
+//     r.Host("{subdomain:[a-z]+}.domain.com")
+//
+// Variable names must be unique in a given route. They can be retrieved
+// calling mux.Vars(request).
+func (r *Route) Host(tpl string) *Route {
+	r.err = r.addRegexpMatcher(tpl, regexpTypeHost)
+	return r
+}
+
+// MatcherFunc ----------------------------------------------------------------
+
+// MatcherFunc is the function signature used by custom matchers.
+type MatcherFunc func(*http.Request, *RouteMatch) bool
+
+// Match returns the match for a given request.
+func (m MatcherFunc) Match(r *http.Request, match *RouteMatch) bool {
+	return m(r, match)
+}
+
+// MatcherFunc adds a custom function to be used as request matcher.
+func (r *Route) MatcherFunc(f MatcherFunc) *Route {
+	return r.addMatcher(f)
+}
+
+// Methods --------------------------------------------------------------------
+
+// methodMatcher matches the request against HTTP methods.
+type methodMatcher []string
+
+func (m methodMatcher) Match(r *http.Request, match *RouteMatch) bool {
+	return matchInArray(m, r.Method)
+}
+
+// Methods adds a matcher for HTTP methods.
+// It accepts a sequence of one or more methods to be matched, e.g.:
+// "GET", "POST", "PUT".
+func (r *Route) Methods(methods ...string) *Route {
+	for k, v := range methods {
+		methods[k] = strings.ToUpper(v)
+	}
+	return r.addMatcher(methodMatcher(methods))
+}
+
+// Path -----------------------------------------------------------------------
+
+// Path adds a matcher for the URL path.
+// It accepts a template with zero or more URL variables enclosed by {}. The
+// template must start with a "/".
+// Variables can define an optional regexp pattern to be matched:
+//
+// - {name} matches anything until the next slash.
+//
+// - {name:pattern} matches the given regexp pattern.
+//
+// For example:
+//
+//     r := mux.NewRouter()
+//     r.Path("/products/").Handler(ProductsHandler)
+//     r.Path("/products/{key}").Handler(ProductsHandler)
+//     r.Path("/articles/{category}/{id:[0-9]+}").
+//       Handler(ArticleHandler)
+//
+// Variable names must be unique in a given route. They can be retrieved
+// calling mux.Vars(request).
+func (r *Route) Path(tpl string) *Route {
+	r.err = r.addRegexpMatcher(tpl, regexpTypePath)
+	return r
+}
+
+// PathPrefix -----------------------------------------------------------------
+
+// PathPrefix adds a matcher for the URL path prefix. This matches if the given
+// template is a prefix of the full URL path. See Route.Path() for details on
+// the tpl argument.
+//
+// Note that it does not treat slashes specially ("/foobar/" will be matched by
+// the prefix "/foo") so you may want to use a trailing slash here.
+//
+// Also note that the setting of Router.StrictSlash() has no effect on routes
+// with a PathPrefix matcher.
+func (r *Route) PathPrefix(tpl string) *Route {
+	r.err = r.addRegexpMatcher(tpl, regexpTypePrefix)
+	return r
+}
+
+// Query ----------------------------------------------------------------------
+
+// Queries adds a matcher for URL query values.
+// It accepts a sequence of key/value pairs. Values may define variables.
+// For example:
+//
+//     r := mux.NewRouter()
+//     r.Queries("foo", "bar", "id", "{id:[0-9]+}")
+//
+// The above route will only match if the URL contains the defined queries
+// values, e.g.: ?foo=bar&id=42.
+//
+// It the value is an empty string, it will match any value if the key is set.
+//
+// Variables can define an optional regexp pattern to be matched:
+//
+// - {name} matches anything until the next slash.
+//
+// - {name:pattern} matches the given regexp pattern.
+func (r *Route) Queries(pairs ...string) *Route {
+	length := len(pairs)
+	if length%2 != 0 {
+		r.err = fmt.Errorf(
+			"mux: number of parameters must be multiple of 2, got %v", pairs)
+		return nil
+	}
+	for i := 0; i < length; i += 2 {
+		if r.err = r.addRegexpMatcher(pairs[i]+"="+pairs[i+1], regexpTypeQuery); r.err != nil {
+			return r
+		}
+	}
+
+	return r
+}
+
+// Schemes --------------------------------------------------------------------
+
+// schemeMatcher matches the request against URL schemes.
+type schemeMatcher []string
+
+func (m schemeMatcher) Match(r *http.Request, match *RouteMatch) bool {
+	return matchInArray(m, r.URL.Scheme)
+}
+
+// Schemes adds a matcher for URL schemes.
+// It accepts a sequence of schemes to be matched, e.g.: "http", "https".
+func (r *Route) Schemes(schemes ...string) *Route {
+	for k, v := range schemes {
+		schemes[k] = strings.ToLower(v)
+	}
+	if r.buildScheme == "" && len(schemes) > 0 {
+		r.buildScheme = schemes[0]
+	}
+	return r.addMatcher(schemeMatcher(schemes))
+}
+
+// BuildVarsFunc --------------------------------------------------------------
+
+// BuildVarsFunc is the function signature used by custom build variable
+// functions (which can modify route variables before a route's URL is built).
+type BuildVarsFunc func(map[string]string) map[string]string
+
+// BuildVarsFunc adds a custom function to be used to modify build variables
+// before a route's URL is built.
+func (r *Route) BuildVarsFunc(f BuildVarsFunc) *Route {
+	r.buildVarsFunc = f
+	return r
+}
+
+// Subrouter ------------------------------------------------------------------
+
+// Subrouter creates a subrouter for the route.
+//
+// It will test the inner routes only if the parent route matched. For example:
+//
+//     r := mux.NewRouter()
+//     s := r.Host("www.example.com").Subrouter()
+//     s.HandleFunc("/products/", ProductsHandler)
+//     s.HandleFunc("/products/{key}", ProductHandler)
+//     s.HandleFunc("/articles/{category}/{id:[0-9]+}"), ArticleHandler)
+//
+// Here, the routes registered in the subrouter won't be tested if the host
+// doesn't match.
+func (r *Route) Subrouter() *Router {
+	router := &Router{parent: r, strictSlash: r.strictSlash}
+	r.addMatcher(router)
+	return router
+}
+
+// ----------------------------------------------------------------------------
+// URL building
+// ----------------------------------------------------------------------------
+
+// URL builds a URL for the route.
+//
+// It accepts a sequence of key/value pairs for the route variables. For
+// example, given this route:
+//
+//     r := mux.NewRouter()
+//     r.HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler).
+//       Name("article")
+//
+// ...a URL for it can be built using:
+//
+//     url, err := r.Get("article").URL("category", "technology", "id", "42")
+//
+// ...which will return an url.URL with the following path:
+//
+//     "/articles/technology/42"
+//
+// This also works for host variables:
+//
+//     r := mux.NewRouter()
+//     r.Host("{subdomain}.domain.com").
+//       HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler).
+//       Name("article")
+//
+//     // url.String() will be "http://news.domain.com/articles/technology/42"
+//     url, err := r.Get("article").URL("subdomain", "news",
+//                                      "category", "technology",
+//                                      "id", "42")
+//
+// All variables defined in the route are required, and their values must
+// conform to the corresponding patterns.
+func (r *Route) URL(pairs ...string) (*url.URL, error) {
+	if r.err != nil {
+		return nil, r.err
+	}
+	if r.regexp == nil {
+		return nil, errors.New("mux: route doesn't have a host or path")
+	}
+	values, err := r.prepareVars(pairs...)
+	if err != nil {
+		return nil, err
+	}
+	var scheme, host, path string
+	queries := make([]string, 0, len(r.regexp.queries))
+	if r.regexp.host != nil {
+		if host, err = r.regexp.host.url(values); err != nil {
+			return nil, err
+		}
+		scheme = "http"
+		if s := r.getBuildScheme(); s != "" {
+			scheme = s
+		}
+	}
+	if r.regexp.path != nil {
+		if path, err = r.regexp.path.url(values); err != nil {
+			return nil, err
+		}
+	}
+	for _, q := range r.regexp.queries {
+		var query string
+		if query, err = q.url(values); err != nil {
+			return nil, err
+		}
+		queries = append(queries, query)
+	}
+	return &url.URL{
+		Scheme:   scheme,
+		Host:     host,
+		Path:     path,
+		RawQuery: strings.Join(queries, "&"),
+	}, nil
+}
+
+// URLHost builds the host part of the URL for a route. See Route.URL().
+//
+// The route must have a host defined.
+func (r *Route) URLHost(pairs ...string) (*url.URL, error) {
+	if r.err != nil {
+		return nil, r.err
+	}
+	if r.regexp == nil || r.regexp.host == nil {
+		return nil, errors.New("mux: route doesn't have a host")
+	}
+	values, err := r.prepareVars(pairs...)
+	if err != nil {
+		return nil, err
+	}
+	host, err := r.regexp.host.url(values)
+	if err != nil {
+		return nil, err
+	}
+	u := &url.URL{
+		Scheme: "http",
+		Host:   host,
+	}
+	if s := r.getBuildScheme(); s != "" {
+		u.Scheme = s
+	}
+	return u, nil
+}
+
+// URLPath builds the path part of the URL for a route. See Route.URL().
+//
+// The route must have a path defined.
+func (r *Route) URLPath(pairs ...string) (*url.URL, error) {
+	if r.err != nil {
+		return nil, r.err
+	}
+	if r.regexp == nil || r.regexp.path == nil {
+		return nil, errors.New("mux: route doesn't have a path")
+	}
+	values, err := r.prepareVars(pairs...)
+	if err != nil {
+		return nil, err
+	}
+	path, err := r.regexp.path.url(values)
+	if err != nil {
+		return nil, err
+	}
+	return &url.URL{
+		Path: path,
+	}, nil
+}
+
+// GetPathTemplate returns the template used to build the
+// route match.
+// This is useful for building simple REST API documentation and for instrumentation
+// against third-party services.
+// An error will be returned if the route does not define a path.
+func (r *Route) GetPathTemplate() (string, error) {
+	if r.err != nil {
+		return "", r.err
+	}
+	if r.regexp == nil || r.regexp.path == nil {
+		return "", errors.New("mux: route doesn't have a path")
+	}
+	return r.regexp.path.template, nil
+}
+
+// GetPathRegexp returns the expanded regular expression used to match route path.
+// This is useful for building simple REST API documentation and for instrumentation
+// against third-party services.
+// An error will be returned if the route does not define a path.
+func (r *Route) GetPathRegexp() (string, error) {
+	if r.err != nil {
+		return "", r.err
+	}
+	if r.regexp == nil || r.regexp.path == nil {
+		return "", errors.New("mux: route does not have a path")
+	}
+	return r.regexp.path.regexp.String(), nil
+}
+
+// GetQueriesRegexp returns the expanded regular expressions used to match the
+// route queries.
+// This is useful for building simple REST API documentation and for instrumentation
+// against third-party services.
+// An empty list will be returned if the route does not have queries.
+func (r *Route) GetQueriesRegexp() ([]string, error) {
+	if r.err != nil {
+		return nil, r.err
+	}
+	if r.regexp == nil || r.regexp.queries == nil {
+		return nil, errors.New("mux: route doesn't have queries")
+	}
+	var queries []string
+	for _, query := range r.regexp.queries {
+		queries = append(queries, query.regexp.String())
+	}
+	return queries, nil
+}
+
+// GetQueriesTemplates returns the templates used to build the
+// query matching.
+// This is useful for building simple REST API documentation and for instrumentation
+// against third-party services.
+// An empty list will be returned if the route does not define queries.
+func (r *Route) GetQueriesTemplates() ([]string, error) {
+	if r.err != nil {
+		return nil, r.err
+	}
+	if r.regexp == nil || r.regexp.queries == nil {
+		return nil, errors.New("mux: route doesn't have queries")
+	}
+	var queries []string
+	for _, query := range r.regexp.queries {
+		queries = append(queries, query.template)
+	}
+	return queries, nil
+}
+
+// GetMethods returns the methods the route matches against
+// This is useful for building simple REST API documentation and for instrumentation
+// against third-party services.
+// An empty list will be returned if route does not have methods.
+func (r *Route) GetMethods() ([]string, error) {
+	if r.err != nil {
+		return nil, r.err
+	}
+	for _, m := range r.matchers {
+		if methods, ok := m.(methodMatcher); ok {
+			return []string(methods), nil
+		}
+	}
+	return nil, nil
+}
+
+// GetHostTemplate returns the template used to build the
+// route match.
+// This is useful for building simple REST API documentation and for instrumentation
+// against third-party services.
+// An error will be returned if the route does not define a host.
+func (r *Route) GetHostTemplate() (string, error) {
+	if r.err != nil {
+		return "", r.err
+	}
+	if r.regexp == nil || r.regexp.host == nil {
+		return "", errors.New("mux: route doesn't have a host")
+	}
+	return r.regexp.host.template, nil
+}
+
+// prepareVars converts the route variable pairs into a map. If the route has a
+// BuildVarsFunc, it is invoked.
+func (r *Route) prepareVars(pairs ...string) (map[string]string, error) {
+	m, err := mapFromPairsToString(pairs...)
+	if err != nil {
+		return nil, err
+	}
+	return r.buildVars(m), nil
+}
+
+func (r *Route) buildVars(m map[string]string) map[string]string {
+	if r.parent != nil {
+		m = r.parent.buildVars(m)
+	}
+	if r.buildVarsFunc != nil {
+		m = r.buildVarsFunc(m)
+	}
+	return m
+}
+
+// ----------------------------------------------------------------------------
+// parentRoute
+// ----------------------------------------------------------------------------
+
+// parentRoute allows routes to know about parent host and path definitions.
+type parentRoute interface {
+	getBuildScheme() string
+	getNamedRoutes() map[string]*Route
+	getRegexpGroup() *routeRegexpGroup
+	buildVars(map[string]string) map[string]string
+}
+
+func (r *Route) getBuildScheme() string {
+	if r.buildScheme != "" {
+		return r.buildScheme
+	}
+	if r.parent != nil {
+		return r.parent.getBuildScheme()
+	}
+	return ""
+}
+
+// getNamedRoutes returns the map where named routes are registered.
+func (r *Route) getNamedRoutes() map[string]*Route {
+	if r.parent == nil {
+		// During tests router is not always set.
+		r.parent = NewRouter()
+	}
+	return r.parent.getNamedRoutes()
+}
+
+// getRegexpGroup returns regexp definitions from this route.
+func (r *Route) getRegexpGroup() *routeRegexpGroup {
+	if r.regexp == nil {
+		if r.parent == nil {
+			// During tests router is not always set.
+			r.parent = NewRouter()
+		}
+		regexp := r.parent.getRegexpGroup()
+		if regexp == nil {
+			r.regexp = new(routeRegexpGroup)
+		} else {
+			// Copy.
+			r.regexp = &routeRegexpGroup{
+				host:    regexp.host,
+				path:    regexp.path,
+				queries: regexp.queries,
+			}
+		}
+	}
+	return r.regexp
+}
diff --git a/vendor/github.com/gorilla/mux/test_helpers.go b/vendor/github.com/gorilla/mux/test_helpers.go
new file mode 100644
index 0000000..8b2c4a4
--- /dev/null
+++ b/vendor/github.com/gorilla/mux/test_helpers.go
@@ -0,0 +1,18 @@
+// Copyright 2012 The Gorilla Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package mux
+
+import "net/http"
+
+// SetURLVars sets the URL variables for the given request, to be accessed via
+// mux.Vars for testing route behaviour.
+//
+// This API should only be used for testing purposes; it provides a way to
+// inject variables into the request context. Alternatively, URL variables
+// can be set by making a route that captures the required variables,
+// starting a server and sending the request to that server.
+func SetURLVars(r *http.Request, val map[string]string) *http.Request {
+	return setVars(r, val)
+}